SMF & MACHINE TOOLS, INC. Vibratory Finishing Equipment 800-643-5839 Rick Seeman or Jeff Huntsman
Home Page | Used Equipment | New Equipment | Medias | Email Us

Click here for more photos

1 USED PANGBORN PLATE AND STRUCTURAL BLASTER WITH:

GENERAL SPECIFICATIONS:

Type of work -- miscellaneous fabricated structures and plate
Type of conveyor -- monorail type
Maximum Work hieght -- 10'-0" wide plate can be cleaned in one pass.
Maximum Work width -- 4'-0"
Rotoblast units -- six 130DD-2RK, 150 total HP
Abrasive flow -- approximately 174,000 pounds per hour.
Total Motor HP -- 200
Ventilation requirement -- 6300 cfm
Compressed air requirements -- Approx. 10 cfm at 80 PSI
Electrical requirements -- 460 volt, 3 phase, 60
Dust collector

GENERAL SYSTEM DATA:
This machine can clean plate up to 10'-0" wide in one pass. For maximum utilization of blast coverage, insure that work is always positioned within the work envelope.

ESTIMATED PRODUCTION:
Commercial (SSPC-6) - Plate: 8-10 fpm -- Structurals: 5-7 fpm
NOTE: ESTIMATED SPEEDS IS BASED ON CLEANING LOW CARBON STEEL OF "A" OR "B" CONDITION. STEEL OF A MORE SEVERE CONDITION OR HAVING A SCALE CONDITION MORE TENACIOUS THAN NORMALLY FOUND ON LOW CARBON STEEL WILL REQUIRE A REDUCED CLEANING SPEED TO ACHIEVE THE DESIRED RESULTS.

NEW 1990's

GOOD CONDITION

DELIVERY: IN STOCK
Located in Mobile, Alabama
PRICE: $79,500

TERMS: NET BEFORE SHIPMENT

SINCERELY,

RICK SEEMAN or JEFF HUNTSMAN, SALES
SMF & MACHINE TOOLS, INC.

ALL MACHINES ARE SUBJECT TO PRIOR SALE. EVERY MACHINE, UNLESS OTHERWISE SPECIFIED, IS OFFERED SUBJECT TO OUR GUARANTEE THAT IF FOUND TO BE MECHANICALLY UNSATISFACTORY WITHIN 30 DAYS AFTER SHIPMENT, SAME MAY BE RETURNED, FREIGHT PREPAID FOR FULL CREDIT. ALL MACHINES RETURNED TO US MUST BE IN AS GOOD A CONDITION AS WHEN SHIPPED.

Return to Tumbleblast Page